Press Brake TRUMPF TruBend 3120, used, new in 2007.

Type: TRUMPF TruBend 3120
New in: 2007
Capacity: 120 to
Max. Bending Length: 3  110 mm
Troat depth: 420 mm
Working speed: 200 (Y) / 500 (X) / 250 (R) / 1.000 (Z) mm/sec
Return speed: 180 (Y) mm/sec
Distance between columns: 2 690 mm
CNC Contro: TASC 3000
Installation height: 1000 mm
Axes: 4 - X, Y, R, Z1 & Z2 manual 
Working hours: 21.428

Press Brake AMADA HFT 50-20, used, new in 2007.

Type: AMADA HFT 50-20
New in: 2007
Capacity: 50 t
Max. Bend Length: 2 085 mm
Approach Speed: 100 mm/sec
Bending Speed: 1 - 10 mm/sec
Distance between uprights: 2665 mm
Throat depth: 420 mm
Working hours: 8 337
Stroke lenght: 200 mm
CNC Control: CD 2002
Axes: 4 - X 1 X 2,Y 1 Y 2, R 

Press Brake TRUMPF TruBend 5050, used, new in 2006.

Type: TRUMPF TruBend 5050
New in: 2006
Capacity: 50 кN
Max. Bending Length: 1275 mm
Stroke: 215 mm
Open height: 385 mm
Rear stop: 860 mm
CNC Contro: TASC 6000, Touchpoint TruBend
Distance between side frames: 1040 mm
Y rapid speed: 25 mm/s
Axes: Y1/Y2 and back stop X/R/Z1/Z2
Power: 10 kVa -15 A 

Press Brake TRUMPF TrumaBend V230, used, new in 2003.

Type: Trumpf TrumaBend V230
New in: 2003
Capacity: 2300 kN
Max. Bend Length: 3 060 mm
Width between columns: 2 690 mm
Stroke: 365 mm
Bending Speed: 10 mm/sec
Return speed: 135 mm/sec
Working speed: 100 mm/sec
Throat: 410 mm
CNC Control: DELEM DA65
Number of controlled axes:  Y1/Y2; X1/X2; Z1/Z2; R1/R2
Working hours: 76.465
Daylight: 535 mm

Press Brake TRUMPF TruBend Center 7030, used, new in 2019.

Type: TRUMPF TruBend Center 7030 
New in: 2019
Max materilal thickness Fe/AL/ Stainless: 3/4/2.2 mm
Min materilal thickness: 0.5 mm
Max. bending length : 3123 mm
Min bending length: 200 mm
Min bending depth (Standart tool): 145 mm
Min bending depth (ENW[V1]): 40 mm
Max. workpiece diagonal: 3460 mm
Max. workpiece size: 3120 X 1500 mm
Max. box height: 220 mm
Working hours: 901

Press Brake TRUMPF TrumaBend  V85, used, new in 2000.

Type: Trumpf TrumaBend  V85
New in: 2000
Capacity: 850 KN
Max. Bend Length: 2050 mm
Working wight between the uprights: 1550 mm
Stroke: 365 mm
Bending Speed: 10 mm/sec
Return speed: 110 mm/sec
Working speed: 100 mm/sec
Safety distance: 200 mm
CNC Control:  DELEM DA65
Number of controlled axes: 4

Press Brake AMADA  HFBO 125-30, used, new in 1999..

Type: AMADA HFB 125-3
New in: 1999
Capacity: 125 t
Folding length: 3 100 mm
Stroke: 180 mm
Approach Speed: 100 mm/sec
Bending Speed: 8 mm/sec
Return speed: 80 mm/sec
CNC Control: Amada Operatour
Distance between uprights: 2 650mm
Axes: 8- Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bend compensation.
Working hours: 45 000

Back to Top